SGe Series

Model: SGe Series
Voltage: 
10V - 1000V
Current: 
5A - 6000A
Power: 
4kW - 150kW
Overview: 
Economical High Power DC Power Supplies

Request A Quote
 
  • Overview
  • Manuals
  • Data Sheets
  • Software
  • Drivers
  • Part No.

The SGe is an economical, FET based, high switching speed, programmable, dc power supply alternative to SCR and IGBT based dc supplies.

Most topologies use either a MosFET or IGBT approach within their power stage to execute their power conversion topology. At the same time end users value low output ripple and noise in conjunction with achieving high slew rates. Both IGBT and SCR based designs typically run at much lower switching speeds requiring a larger LC output filter design for similar performance or require degrading ripple and noise performance in order to maintain competitive power densities. The filter design in this case may be balanced to trade off performance of response time with output ripple and noise and densities.

In contrast, our SGe line leverages the benefits of using high switching speed Mosfets requiring a much smaller output stage LC filter in order to provide competitive output ripple and noise performance and response time without compromising power densities. Available in two control versions, the SGe has basic analog controls, while the SGI provides intelligent control features

SGe: Real Value - Analog Control
The SGe, with its outstanding FET based power electronics, is available for customers requiring simple front panel analog controls or external control. With high performance power electronics the SGe provides essential features like 10- turn potentiometers for setting voltage and current, 3½ digit LED readout plus front panel over-voltage protection (OVP) preview/adjustment and reset.

img1
Operations Manual (Rev B)
img1
Programming Manual - (SG) Ethernet, IEEE, RS232 (Rev L)
Title
Document
Download
Operations Manual (Rev B)
DocumentOperations Manual (Rev B)
Programming Manual - (SG) Ethernet, IEEE, RS232 (Rev L)
DocumentProgramming Manual - (SG) Ethernet, IEEE, RS232 (Rev L)
img1
SGe Series Data Sheet
Title
Document
Download
SGe Series Data Sheet
DocumentSGe Series Data Sheet
img1
DC Virtual Panels V1.0.10 for Microsoft Windows 7/8/10
img1
Ethernet IP Address Discovery Utility − 5608665-02
img1
Flash Wizard - RS232_GPIB Only Version 1.0 for Microsoft Windows 7/8/10 (32-bit, 64-bit) (GPIB_4540102-01_signed)
img1
IVI-COM w/IVI-C wrapper (ethernet or RS-232 or GPIB) V2.1.9 32-bit
img1
IVI-COM w/IVI-C wrapper (ethernet or RS-232 or GPIB) V2.1.9 64-bit
Title
Document
Download
DC Virtual Panels V1.0.10 for Microsoft Windows 7/8/10
DocumentDC Virtual Panels V1.0.10 for Microsoft Windows 7/8/10
Ethernet IP Address Discovery Utility − 5608665-02
DocumentEthernet IP Address Discovery Utility − 5608665-02
Flash Wizard - RS232_GPIB Only Version 1.0 for Microsoft Windows 7/8/10 (32-bit, 64-bit) (GPIB_4540102-01_signed)
DocumentFlash Wizard - RS232_GPIB Only Version 1.0 for Microsoft Windows 7/8/10 (32-bit, 64-bit) (GPIB_4540102-01_signed)
IVI-COM w/IVI-C wrapper (ethernet or RS-232 or GPIB) V2.1.9 32-bit
DocumentIVI-COM w/IVI-C wrapper (ethernet or RS-232 or GPIB) V2.1.9 32-bit
IVI-COM w/IVI-C wrapper (ethernet or RS-232 or GPIB) V2.1.9 64-bit
DocumentIVI-COM w/IVI-C wrapper (ethernet or RS-232 or GPIB) V2.1.9 64-bit
img1
Sorensen Labview Driver V1.0 - Labview 2012 for Microsoft Windows 7/8/10 (32-bit)
img1
Sorensen Labview Driver V1.0 - Labview 2012 for Microsoft Windows 7/8/10 (64-bit)
img1
Sorensen Labview Driver V1.0 - Labview 2013 for Microsoft Windows 7/8/10 (32-bit)
img1
Sorensen Labview Driver V1.0 - Labview 2013 for Microsoft Windows 7/8/10 (64-bit)
Title
Document
Download
Sorensen Labview Driver V1.0 - Labview 2012 for Microsoft Windows 7/8/10 (32-bit)
DocumentSorensen Labview Driver V1.0 - Labview 2012 for Microsoft Windows 7/8/10 (32-bit)
Sorensen Labview Driver V1.0 - Labview 2012 for Microsoft Windows 7/8/10 (64-bit)
DocumentSorensen Labview Driver V1.0 - Labview 2012 for Microsoft Windows 7/8/10 (64-bit)
Sorensen Labview Driver V1.0 - Labview 2013 for Microsoft Windows 7/8/10 (32-bit)
DocumentSorensen Labview Driver V1.0 - Labview 2013 for Microsoft Windows 7/8/10 (32-bit)
Sorensen Labview Driver V1.0 - Labview 2013 for Microsoft Windows 7/8/10 (64-bit)
DocumentSorensen Labview Driver V1.0 - Labview 2013 for Microsoft Windows 7/8/10 (64-bit)
SGe : Model Number Description


Options and Accessories
Control Options
A Analog
I Intelligent
Input Voltage Options
C Input Voltage 187 / 242VAC
D Input Voltage 342 / 440VAC
E Input Voltage 396 / 528VAC
Remote Control Options
0A No Options
1A IEEE-488.2 + RS-232C (RS-232 comes standard on SGI
1C Ethernet / RS-232
1E Shaft Locks (SGA series only)
Process options
AA No Options
AB AB: Certificate of Calibration to ANSI / NCSL Z540-1 (includes Test Data)
Modifications
AJ Front panel dust filter - factory installed - 3U unit only
CV 400Hz AC input @ 208 VAC ( does not carry CE, CSA or UL marks ) ( 6U only ) STD on 3U
PF Passive power factor correction to 0.9 (Only applicable to 40V, 60V to 800V. Included in 10V-30V and 50V.)
Accessories
890-453-03 Paralleling Cable (for up to 5 units, requires one cable per unit placed in parallel)
K550212-01 3U Rack Slides (for 5kW, 10kW and 15kW models)
K550213-01 6U Rack Slides (for 20kW, 25kW and 30kW models)
K550532-01 Front panel dust filter - field installation kit - 3U unit only
5551082-01 Optional AC input cover kit - 3U unit only
Contact factory for other combinations

X
By continuing to use this site, you agree to our Privacy Policy.
OK